Emergency Shot - Setup

Updated by Philip Malmquist

What is an Emergency Shots

The Emergency Shot feature lets users create quick-response irrigation schedules, either standalone or within existing schedules. It triggers irrigation when water content is too low or EC levels are too high and can operate during the photoperiod, dark period, or continuously, ensuring crops remain within ideal conditions.

Step 1: Access the Irrigation Setup modal

  1. From the Room Dashboard or a Harvest Group, click on a pre-created schedule or create a new one
  2. If a new schedule is created, select the zones and name your schedule
  3. Optional: Configure time based programs. If no time based schedule is desired, delete the pre-configured P1 program

Step 2: Configure Emergency Event

  1. Expand the Set Point Emergency Event Box
  2. Choose the timing of the event
  3. Configure when and what zones to trigger an event for
  4. Configure triggering points by selecting one or both of:
    1. Volumetric Water Content - Minimum limit
    2. Pore water EC - Maximum limit
  5. Select duration for emergency event
  6. Select wait time between emergency events
  7. Save the schedule

How did we do?

Powered by HelpDocs (opens in a new tab)